Broadcast SRC-32 Instrukcja Użytkownika Pobierz pdf (Strona 17)

Force a closure at input 1 through 16 on the first block (J5) and 17

through 32 on the second block (J6) starting with the first connector

position on the GPI 32. There are two common connections on each

block and they are the two connections farthest to the right hand side

of the plug looking from the back of the unit. They are generally

green in color and will have a “lug” type set screw. There are two DB

37 connectors on the back also and you may install a straight through

StarGuide II/III to GPI 32 cable for convenience. Either connection

will produce the same results.

The screen shot below shows the ASCII text on the Hyper Terminal

screen for the first 16 closures that were manually forced. If you are

not seeing any text on the screen, verify that the GPI 32 DIP switch

settings have position 5 and 6 in the up or on position and the rest of

the switches down or in the off position. Also verify your settings

including COM port are correct in Hyper Terminal.

1 2 ... 12 13 14 15 16 17 18 19

Brak uwag

Broadcast SRC-32 Instrukcja Użytkownika Strona 17